Cisco Systems Cisco MGX 8850 Manuale Utente
3-46
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 3
Equipment and Resource Provisioning
dnln
dnln
Down Line
The dnln command lets you de-activate a line on the current card. Before you can de-activate a line, you
must take the following steps:
must take the following steps:
Step 1
Remove connections. Use delcon or delcons.
Step 2
Remove any resource partitions. Use dsprscprtn to see existing partitions and delrscprtn to remove
partitions.
partitions.
Step 3
Remove all logical ports. Use dspports to see existing logical ports on the line and delport to remove
logical ports.
logical ports.
Cards on Which This Command Runs
AXSM
Syntax
dnln <bay.line>
Syntax Description
Related Commands
dspln, dsplns, cnfln, upln
Attributes
Example
De-activate line 1 in bay 1.
MGX8850.1.AXSM.a > dnln 1.1
bay.line
Identifies the bay (1 or 2) and the number of the line. The line number is from 1 to the
highest numbered line on the back card. For the range of line numbers on specific
AXSM models, see
highest numbered line on the back card. For the range of line numbers on specific
AXSM models, see
Log: log
State: active
Privilege: GROUP1