Cisco Systems Cisco MGX 8850 Manuale Utente
5-15
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5
PNNI Commands
aesa_ping
aesa_ping
ATM End Station Address Ping—confirm the connection from a node to an ATM End Station.
The aesa_ping command lets you ping any ATM end station address (AESA) connected to a PNNI
network. Use this command to check PNNI connectivity to the given destination address. You can use
the optional arguments -setupcall, -qos, -trace, and -data to send packets and provide greater
granularity to the information that the command sends to the screen.
network. Use this command to check PNNI connectivity to the given destination address. You can use
the optional arguments -setupcall, -qos, -trace, and -data to send packets and provide greater
granularity to the information that the command sends to the screen.
The parameters that you enter in the aesa_ping command don’t specify anything except the execution
of the command itself. All behaviors started by the command stop when the interval -timeout expires.
of the command itself. All behaviors started by the command stop when the interval -timeout expires.
Cards on Which This Command Runs
PXM45
Syntax
aesa_ping <destination address>
[-setupcall {yes | no}]
[-qos {ubr | abr | cbr}]
[-trace {yes | no}]
[-data {enable | disable}]
[-timeout {time out in secs}]
[-interval {time}]
[-pcr {peak cell rate}]
[-scr {sustain cell rate}]
Syntax Description
destination address
Set up the destination address in Network Service Access Point (NSAP)
format.
format.
Default: null
-setupcall
Set up a switched virtual connection (SVC) as part of a ping. The call is torn
down when the interval expires (see -timeout parameter).
down when the interval expires (see -timeout parameter).
yes: Set up a call.
no: Do not set up a call.
no: Do not set up a call.
Default: no
-qos
The quality of service (QoS) used for switched virtual connection (SVC)
ping connection. The QoS can be CBR, ABR, or UBR.
ping connection. The QoS can be CBR, ABR, or UBR.
Default: UBR