Cisco Systems Cisco MGX 8850 Manuale Utente

5-56

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 5

PNNI Commands

dsppnni-bypass

Display PNNI Bypasses

—display the PNNI complex node bypass table.

This debugging command displays the PNNI bypass table for a logical group node (LGN) that uses the
complex node representation of its peer group. The bypass table contains the topology and Hello
information of every node in the peer group.

Note

This command applies to multi-peer groups only.

Cards on Which This Command Runs

PXM45

Syntax

dsppnni-bypass <node-index>

Syntax Description

Display Contents

The display contains the following fields for each node.

node-index

The node index points to the LGN of this peer group. It indicates the relative
level of the node within the hierarchy on the switch. The range is 1–10, and the
lowest level is 1.

Range: 1–10
Default: 1

node-index

The node index indicates the relative level of the logical node within a
multi-peer group on the switch. The supported range is 1–10, and the lowest
level is 1

Input port Id

The logical form of port identifier at the input.

Range: 1–2147483648.

Output port Id

The logical form of port identifier at the output.

Range: 1–2147483648.

ptse id

Display the unique identifier assigned to the PNNI topology state elements
PTSE. ptse-id is the 32 bit numeric node identifier assigned by the software—it
is not user-configurable.

flags

Although a hexadecimal flag appears, it applies to software debugging by Cisco
engineers and so is not described here.