Cisco Systems Cisco MGX 8850 Manuale Utente
5-77
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 5
PNNI Commands
dsppnni-node
dsppnni-node
Display PNNI Node
—display the PNNI node information address and routing information.
The dsppnni-node command displays the PNNI logical node information on the local switch. If you do
not provide an index number, the output shows all logical nodes on the switch. However, in the current
release, the display always shows only one logical node—with index number 1.
not provide an index number, the output shows all logical nodes on the switch. However, in the current
release, the display always shows only one logical node—with index number 1.
Cards on Which This Command Runs
PXM45
Syntax
dsppnni-node
[node-index]
Syntax Description
Related Commands
addpnni-node, cnfpnni-node
Attributes
node-index
The node-index identifies a logical node in relation to other nodes in the
hierarchy. This node index applies locally within the switch.In the current
release, the only local node index is the default of 1, so you do not actually have
to enter it.
hierarchy. This node index applies locally within the switch.In the current
release, the only local node index is the default of 1, so you do not actually have
to enter it.
Range: 1–10
Default: 1
Log: log
State: active, standby
Privilege: ANYUSER