Cisco Systems Cisco MGX 8850 Manuale Utente
6-59
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
delpnport
delpnport
Delete Port
Remove a UNI or NNI port from the controller. It is allowed only if the PNNI port does not exist on the
switch i.e, the PNNI partition associated with the port is removed. If the controller does no provisioning
on the port in the Plug and Play Scenario, then the PNNI port on the controller is removed if you remove
the PNNI Partition on the switch.
switch i.e, the PNNI partition associated with the port is removed. If the controller does no provisioning
on the port in the Plug and Play Scenario, then the PNNI port on the controller is removed if you remove
the PNNI Partition on the switch.
Cards on Which This Command Runs
PXM45
Syntax
delpnport <portid>
Syntax Description
Related Commands
addpnport, uppnport, dnpnport, dsppnport
Attributes
Example
Delete port 11:2.8:28 from the switch.
Geneva.7.PXM.a > delpnport 11:2.8:28
portid
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also
See also
Log: log
State: active
Privilege: GROUP1