Cisco Systems Cisco MGX 8850 Manuale Utente
6-67
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 6
Logical Node, Port, and Signaling Commands
dspconsegep
dspconsegep
Display Connection Segment Endpoint
Displays oam segment endpoint for a connection endpoint. When both vpi and vci are present, the
segment endpoint is a F5 flow endpoint (for VCCs). When the optional vci is not present, the segment
endpoint is a F4 flow endpoint (for VPCs). This command applies to established calls only.
segment endpoint is a F5 flow endpoint (for VCCs). When the optional vci is not present, the segment
endpoint is a F4 flow endpoint (for VPCs). This command applies to established calls only.
Cards on Which This Command Runs
PXM45
Syntax
dspconsegep <portid> vpi [vci]
Syntax Description
Related Commands
cnfoamsegep, dspoamsegep, cnfconsegep, delconsegep
Attributes
portid
The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport].
See also
See also
vpi
The VPI of the connection.
vci
The VCI of the connection.
Log: log
State: active, standby
Privilege: ANYUSER