Cisco Systems Cisco MGX 8850 Manuale Utente
7-46
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7
SPVC and SVC Commands
dspconsegep
dspconsegep
Display Connection Segment Endpoint
Displays OAM segment endpoint for a connection endpoint. When both VPI and VCI are present, the
segment endpoint is an F5 flow endpoint (for VCCs). When the optional VCI is not present, the segment
endpoint is an F4 flow endpoint (for VPCs). This command is used only for established calls.
segment endpoint is an F5 flow endpoint (for VCCs). When the optional VCI is not present, the segment
endpoint is an F4 flow endpoint (for VPCs). This command is used only for established calls.
Note
The delconsegep command works for SVCs only.
Cards on Which This Command Runs
PXM45
Syntax
dspconsegep <portid>
vpi
[vci]
Syntax Description
Related Commands
cnfoamsegep, dspoamsegep, cnfconsegep, delconsegep
Attributes
portid
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
[shelf.]slot[:subslot].port[:subport]. See also
vpi
The VPI of the connection.
vci
The VCI of the connection.
Log: log
State: active, standby
Privilege: ANYUSER