Cisco Systems Cisco MGX 8850 Manuale Utente
7-49
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 7
SPVC and SVC Commands
dsppncon
dsppncon
Display PNNI Connection—display information about an existing call.
Displays information for an active SVC, SPVC, or SPVP. The displayed call information corresponds
to the objects described in the portCallTable and portAbrCallTable MIBs. This command can be
issued at any node in the route path.
to the objects described in the portCallTable and portAbrCallTable MIBs. This command can be
issued at any node in the route path.
Cards on Which This Command Runs
PXM45
Syntax
dsppncon <portid> <vpi> <[vci]>
Syntax Description
Related Commands
dsppncons
Attributes
portid
The portid represents the PNNI physical port and has the format
[shelf.]slot[:subslot].port[:subport]. See also
[shelf.]slot[:subslot].port[:subport]. See also
vpi
VPI for the call. Default = 0.
vci
VCI for the call. If no VCI is specified, this is a VP connection. Default = 0.
Log: no log
State: active, standby
Privilege: ANYUSER