Cisco Systems Cisco MGX 8850 Manuale Utente
9-95
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9
Troubleshooting Commands
dspcontrollers
dspcontrollers
Display Controllers
Displays all controllers that have been added through the addcontroller command.
Cards on Which This Command Runs
PXM45
Syntax
dspcontrollers
Syntax Description
This command takes no parameters.
Related Commands
addcontroller, delcontroller
Attributes
Example
Display all controller. In this example, the switch has only one controller—PNNI. The display also
shows that the controller is internal (slot 7) and has the optional, user-specified name PNNITWO. Apart
from controller information, the display shows that no shelf alarms exist.
shows that the controller is internal (slot 7) and has the optional, user-specified name PNNITWO. Apart
from controller information, the display shows that no shelf alarms exist.
pop20two.7.PXM.a > dspcontrollers
pop20two System Rev: 02.00 Jul. 30, 2000 09:39:36 GMT
MGX8850 Shelf Alarm: NONE
Number of Controllers: 1
Controller Name: PNNITWO
Controller Id: 2
Controller Location: Internal
Controller Type: PNNI
Controller Logical Slot: 7
Controller Bay Number: 0
Controller Line Number: 0
Controller VPI: 0
Controller VCI: 0
Controller In Alarm: NO
Controller Error:
Log: no log
State: active
Privilege: ANYUSER