Cisco Systems Cisco MGX 8850 Manuale Utente
9-108
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 9
Troubleshooting Commands
dsperrhist
dsperrhist
Display Error History—displays a list of errors for a card slot.
The display consists of the following for each record in the history file:
•
A number for the entry in the error history file
•
An event number in hexadecimal format
•
An event name—a few words that describe the error (such as the severity or affected area)
•
A time stamp
The maximum number of entries in the history for a slot is 10. When the 11th error is logged, the switch
deletes the oldest entry. Alternatively, you can clear the error history by executing clrerrhist.
deletes the oldest entry. Alternatively, you can clear the error history by executing clrerrhist.
If no entries exist in the history, the system returns the message, Nothing is logged.
Cards on Which This Command Runs
PXM45
Syntax
dsperrhist [slot]
Syntax Description
Related Commands
clrerrhist
Attributes
Examples
Display the error history for the current PXM45. This PXM45 resides in slot 8.
jdlenoir.8.PXM.a > dsperrhist
Log of Errors and Failures (Slot 8):
Entry#--Event#---EventName-------------------------------TimeStamp-----------
General:
01 0x5006 CBC(Slave) Non-Fatal Minor 11/21/2000-17:55:49
02 0x5006 CBC(Slave) Non-Fatal Minor 11/21/2000-17:57:36
03 0x5006 CBC(Slave) Non-Fatal Minor 11/21/2000-18:22:47
-----------------------------------------------------------------------------
slot
Number of the slot—any slot in the switch. If you do not enter a slot number, the
system displays the error history on the active PXM45.
system displays the error history on the active PXM45.
Log: no log
State: active, standby, init
Privilege: ANYUSER