Cisco Systems Cisco MGX 8850 Manuale Utente
2-25
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2
Shelf Management Commands
cnfname
cnfname
Configure Name—specifies a name for the node.
The case-sensitive node name must begin with a letter. It can include:
•
Up to 32 letters or numbers
•
Two special characters (“_” and “-”)
•
No spaces
After you enter the name, the system prompts you for confirmation. To see the configured name, execute
dspcds (or many of the other node-level display commands): the node name is the first item in the
display.
dspcds (or many of the other node-level display commands): the node name is the first item in the
display.
Cards on Which This Command Runs
PXM45
Syntax
cnfname
<node name>
Syntax Description
Related Commands
None
Attributes
Example
Configure the node name to be “MGX8850.” The system requests you to confirm the name. The CLI
prompt returns with the new name. In this example, however, the name as it appears in the prompt is
truncated to eight characters because of space limitations for information displayed in the prompt.
prompt returns with the new name. In this example, however, the name as it appears in the prompt is
truncated to eight characters because of space limitations for information displayed in the prompt.
NODENAME.7.PXM.a > cnfname MGX8850
This node name will be changed to MGX8850. Please Confirm
Do you want to proceed (Yes/No)?
MGX8850.7.PXM.a >
node name
Node name consisting of up to 32 alpha-numeric characters.
Log: log
State: active
Privilege: SUPER_GP