Cisco Systems Cisco MGX 8850 Manuale Utente
2-34
Cisco MGX 8850 Routing Switch Command Reference
Release 2.0, Part Number 78-10467-04 Rev C0, October 2001
Chapter 2
Shelf Management Commands
cnftime
cnftime
Configure Time
Configures the time for the node. To see the time after you execute cnftime, use dspdate. The system
displays the time in 24-hour format.
displays the time in 24-hour format.
Note
Configure a time zone through cnftmzn and optional GMT offset through cnftmzngmt before you
configure the time through cnftime.
configure the time through cnftime.
Cards on Which This Command Runs
PXM45
Syntax
cnftime <hh:mm:ss>
Syntax Description
Related Commands
cnfdate, cnftmzn, dspdate
Attributes
Example
Set time for 2 PM. plus 11 minutes and 22 seconds.
excel.1.3.PXM.a > cnftime 14:11:22
hh:mm:ss
The format for time specification is:
•
hh is the hour in the range 01–24.
•
mm is the minute in the range 01–60.
•
ss is the second in the range 01–60.
Log: log
State: active
Privilege: SUPER_GP