DELL 9.8(0.0) Manuale Utente
• iSCSI Optimization (iscsioptacl): 0 (disabled)
Allocate space to each CAM region.
Enter the CAM profile name then the amount of CAM space
to be allotted. The total space allocated must equal 13. The
ipv6acl range must be a factor of 2.
to be allotted. The total space allocated must equal 13. The
ipv6acl range must be a factor of 2.
Enter 4 or 8 for the number of OpenFlow FP blocks.
• 4: Creates 242 entries for use by the OpenFlow controller
(256 total entries minus the 14 entries reserved for
internal functionality)
• 8: Creates 498 entries for use by the OpenFlow controller
(512 total entries minus the 14 entries reserved for
internal functionality)
Using the fcoe parameter, enter the number of FP groups to
be allocated for FCoE transit. Enter 1 – 6; maximum six
groups. Each group has 128 entries, creating a total of 768
possible entries for FCoE FP groups. The value given must be
an even number.
be allocated for FCoE transit. Enter 1 – 6; maximum six
groups. Each group has 128 entries, creating a total of 768
possible entries for FCoE FP groups. The value given must be
an even number.
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
9.2(0.2)
Added support for the fcoe parameter on the S4810 and
S4820T.
S4820T.
9.1.(0.0)
Added support for OpenFlow on the Z9000.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Added the keywords fcoeacl and iscsioptacl on the
S4810.
S4810.
8.3.11.1
Introduced on the Z9000.
8.3.1.0
Added the keywords ecfmacl, vman-qos, and vman-
dual-qos.
dual-qos.
8.2.1.0
Introduced on the S-Series.
7.8.1.0
Introduced on the C-Series.
Control and Monitoring
105