DELL 9.8(0.0) Manuale Utente

Parameters

kbps

Enter the keyword kbps to specify the rate limit in Kilobits 
per second (Kbps). Make the following value a multiple of 64. 
The range is from 0 to 40000000. The default granularity is 
Megabits per second (Mbps).

The range is from 10 to 40000.

(OPTIONAL) Enter the burst size in KB. The range is from 0 to 
40000. The default is 100.

Defaults

Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.

Command 
Modes

QOS-POLICY-OUT

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

Usage 
Information

On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for 
some values, the shaped rate is much less than the value configured.

Related 
Commands

 — shapes traffic output as part of the designated policy.

 — creates a QoS output policy.

service-policy input

Apply an input policy map to the selected interface.

S4820T

Syntax

service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy 
input policy-map-name [layer2] command.

Parameters

Enter the name for the policy map in character format (32 
characters maximum). You can identify an existing policy 
map or name one that does not yet exist.

Quality of Service (QoS)

1485