DELL 9.8(0.0) Manuale Utente
Version
Description
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
pre- 6.2.1.1
Introduced on the E-Series.
Usage
Information
Information
To enable the interface to send both version of RIP packets, use the ip rip send
version 1 2 command.
version 1 2 command.
Related
Commands
Commands
— sets the RIP version for the interface to receive traffic.
ip split-horizon
Enable split-horizon for RIP data on the interface. As described in RFC 2453, the split-horizon scheme
prevents any routes learned over a specific interface to be sent back out that interface.
S4820T
Syntax
ip split-horizon
To disable split-horizon, use the no ip split-horizon command.
To disable split-horizon, use the no ip split-horizon command.
Defaults
Enabled
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
Routing Information Protocol (RIP)
1523