DELL 9.8(0.0) Manuale Utente

To delete the association between a TACACS server group and a VRF and source 
interface, use the no tacacs-server vrf vrf-name [source-interface 
interface] command.

Parameters

vrf vrf-name

Enter the keyword vrf and then the name of the VRF to 
associate a TACACS server group with that VRF.

Enter the following keywords and slot/port or number 
information:

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE then the slot/port information.

• For a Loopback interface, enter the keyword loopback 

then a number from 0 to 16383.

• For a port channel interface, enter the keywords port-

channel then a number.

• For a Null interface, enter the keyword null then the Null 

interface number.

• For a VLAN interface, enter the keyword vlan then a 

number from 1 to 4094.

Defaults

Not configured.

Command 
Modes

TACACS SERVER GROUP

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000–ON.

9.4.(0.0)

Introduced on the S-Series and Z-Series.

Usage 
Information

You can use this command to associate a group of TACACS servers with a VRF and 
source interface. You can configure the source interface only with the VRF 
attribute and source interface is optional with the VRF attributes.

If VRF is not configured on the TACACS group, then the group is considered to be 
on the default VRF.

RADIUS groups and VRFs have one-to-one mapping. If a VRF is configured with 
one RADIUS group, then you cannot use the same VRF with another RADIUS 
group. When the VRF is removed, then the corresponding RADIUS group is also 
removed automatically.

Security

1621