DELL 9.8(0.0) Manuale Utente
The following describes the show ip bgp damp command shown in the
following example.
following example.
Field
Description
Network
Displays the network ID to which the route is dampened.
From
Displays the IP address of the neighbor advertising the
dampened route.
dampened route.
Reuse
Displays the hour:minutes:seconds until the dampened
route is available.
route is available.
Path
Lists all the ASs the dampened route passed through to
reach the destination network.
reach the destination network.
Example
Dell#show ip bgp dampened-paths
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
d 55.0.0.0/24 172.16.0.2 00:36:23 200
Dell#
show ip bgp detail
Display BGP internal information for the IPv4 Unicast address family.
S4820T
Syntax
show ip bgp [ipv4 unicast] detail
Defaults
none
Command
Modes
Modes
• EXEC
• EXEC Privilege
• EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
496
Border Gateway Protocol