Q-Logic SANBOX2-8C Manuale Utente

B – Command Line Interface

Zone Command

B-62

59042-00 A

Manages zones and zone membership on a switch. The Zone command defines 
members (ports and devices) for a single switch. Zones are members of zone 
sets.

Admin authority within a Zoning Edit session. Refer to the 

. List, Members, and zone sets keywords are available with User 

authority and do not require a Zoning Edit session.

add [zone] [members]
copy [zone_source] [zone_destination]
create [zone]
delete [zone]
list
members [zone]
remove [zone] [members]
rename [zone_old [zone_new]
type [zone] [zone_type]
zonesets [zone]

add [zone] [members]
Specifies one or more ports given by [members] to add to the zone named [zone]. 
. [members] can have one of the following formats:

■

Domain ID and port number pair (Domain ID, Port Number). Domain IDs and 
port numbers are in decimal. Ports are numbered beginning with 0.

■

6-character device Fibre Channel address (hex)

■

16-character hexadecimal worldwide port name (WWPN) with the format 
xx:xx:xx:xx:xx:xx:xx:xx.

■

Alias name

The application verifies that the [zone] format is correct, but does not validate that 
such a port exists

copy [zone_source] [zone_destination]
Creates a new zone named [zone_destination] and copies the membership into it 
from the zone given by [zone_source].

create [zone]
Creates a zone with the name given by [zone]. The zone name can have a 
maximum of 64 alpha-numeric characters without spaces.

delete [zone]
Deletes the specified zone given by [zone] from the zoning database. If the zone 
is a member of the active zone set, the zone will not be removed from the active 
zone set until the active zone set is deactivated.