Q-Logic SANBOX2-64 Manuale Utente
2 – General Description
Chassis Hardware
2-2
59043-01 A
2.1
Chassis Hardware
The SANbox2-64 switch is set of up to eight 8-port I/O blades. Each I/O blade is
interconnected with all other I/O blades through the backplane which is supported
by four cross-connect ASICs. A CPU module provides configuration, monitoring,
data path management, and control functions.
interconnected with all other I/O blades through the backplane which is supported
by four cross-connect ASICs. A CPU module provides configuration, monitoring,
data path management, and control functions.
The base SANbox2-64 switch is configured as a 16-port switch. The 16-port
switch is equipped with 2 I/O blades, 2 power supply modules, and a CPU
module. To maintain proper air flow and cooling in the 16-port switch, inserts are
installed in empty I/O blade slots. You can expand the switch by installing
additional I/O blades up to a total of eight. The 64-port switch is equipped with
8 I/O blades, 2 power supply modules, and a CPU module as shown in
switch is equipped with 2 I/O blades, 2 power supply modules, and a CPU
module. To maintain proper air flow and cooling in the 16-port switch, inserts are
installed in empty I/O blade slots. You can expand the switch by installing
additional I/O blades up to a total of eight. The 64-port switch is equipped with
8 I/O blades, 2 power supply modules, and a CPU module as shown in
.
for the marginal operating
configurations.
Figure 2-1. SANbox2-64 64-Port Fibre Channel Switch
Power Supply
Modules
I/O Blades
CPU Module
I/O Blades