Q-Logic SANBOX2-64 Manuale Utente
2 – General Description
Chassis Controls and LEDs
2-6
59043-01 A
2.2.2
Chassis LEDs
The chassis LEDs shown in
provide status information about switch
operation.
Figure 2-4. Chassis LEDs
2.2.2.1
Input Power LED (Green)
The Input Power LED indicates the voltage status at the switch logic circuitry. This
LED illuminates when the switch logic circuitry is receiving the proper DC
voltages.
LED illuminates when the switch logic circuitry is receiving the proper DC
voltages.
2.2.2.2
Heartbeat LED (Amber)
The Heartbeat LED indicates the status of the internal switch processor and the
results of Power On Self Tests (POSTs). Following a normal power-up, the
Heartbeat LED blinks about once per second to indicate that the switch passed
the POST and that the internal switch processor is running. In maintenance mode,
the Heartbeat LED illuminates continuously. Refer to
results of Power On Self Tests (POSTs). Following a normal power-up, the
Heartbeat LED blinks about once per second to indicate that the switch passed
the POST and that the internal switch processor is running. In maintenance mode,
the Heartbeat LED illuminates continuously. Refer to
for more information about Heartbeat LED blink patterns.
Over Temperature LED
(Amber)
Input Power LED
(Green)
Fan Fail LED
(Amber)
Heartbeat LED
(Amber)