Q-Logic 59021-05 B Manuale Utente
B – Command Line Interface
Show Config Command
59021-05 B
B-53
Q
Show Config Command
Displays switch, port, alarm threshold, and zoning attributes for the current
configuration.
configuration.
Authority
User
Syntax
show config
port [port_number]
switch
threshold
zoning
switch
threshold
zoning
Keywords
port [port_number]
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
specified.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
specified.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples
The following is an example of the Show Config Port command:
SANbox2 #> show config port 3
Configuration Name: default
-------------------
Port Number: 3
------------
AdminState Online
LinkSpeed Auto
PortType GL
ISLSecurity Any
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnable False
LCFEnable False
MFSEnable False
MFS_TOV 640
MSEnable False