Q-Logic 59022-03 D Manuale Utente
4 – Managing Switches
Configuring a Switch
4-10
59022-03 D
4.6.1.5
Timeout Values
The switch timeout values determine the timeout values for all ports on the switch.
describes the switch timeout parameters. The R_A_TOV, R_T_TOV, or
E_D_TOV values must be the same for all switches in the fabric.
Note:
Timeout values can only be changed if the switch operational state is
offline.
offline.
Table 4-4. Timeout Values
Parameter
Description
R_A_TOV
Resource Allocation Timeout. The maximum amount of time a
frame could be delayed in the fabric and still be delivered. The
default is 10000 milliseconds.
frame could be delayed in the fabric and still be delivered. The
default is 10000 milliseconds.
R_T_TOV
Receiver Transmitter Timeout. The amount of time that
synchonization may be lost between two ports before link
failure is detected. The default is 100 milliseconds.
synchonization may be lost between two ports before link
failure is detected. The default is 100 milliseconds.
E_D_TOV
Error Detect Timeout. The maximum round trip time that an
operation between two N_Ports could require. The default is
2000 milliseconds.
operation between two N_Ports could require. The default is
2000 milliseconds.