NEC N8191-09 Manuale Utente

 

Connect the cables to the server switch unit in the following procedure.    (The figure below shows an 
example of the server switch unit installed in the rack with eight servers connected.) 

 

 

1.  Connect the keyboard/mouse connector and display connector of the first server through the 

dedicated cable (K410-118 or K410-119).    First connect the cable to the connector on the 
server switch unit.    (Connect in the order of 

 and ‚.) 

 

It is recommended to attach the Device ID Label to the cable with destination 
device name filled in.    It is useful when relocating or cleaning the unit. 

 

Use the dedicated cables listed below to connect the server switch unit with the server. 

Server switch unit USB 
connection cable set (1.8 
m) 

K410-118(1A) 

Used to connect the server to the server 
switch unit via USB connection. 

Server switch unit USB 
connection cable set (3.0 
m) 

K410-118(03) 

Used to connect the server to the server 
switch unit via USB connection. 

Server switch unit USB 
connection cable set (5.0 
m) 

K410-118(05) 

Used to connect the server to the server 
switch unit via USB connection. 

Server switch unit PS/2 
connection cable set (1.8 
m) 

K410-119(1A) 

Used to connect the server to the server 
switch unit via PS/2 connection.    Always 
use this cable between master and slave 
sides in cascade connection. 

Server switch unit PS/2 
connection cable set (3.0 
m) 

K410-119(03) 

Used to connect the server to the server 
switch unit via PS/2 connection. 

Server switch unit PS/2 
connection cable set (5.0 
m) 

K410-119(05) 

Used to connect the server to the server 
switch unit via PS/2 connection. 

 

- 

50

 -