Netgear GS724TS-100NAS Manuale Utente

Authentication List Configuration

Use the Authentication List page to configure the default login list. A login list specifies one or 
more authentication methods to validate switch or port access for the admin user.

Admin is the only user on the system and is assigned to a 

preconfigured list named defaultList, which you cannot delete.

To access the Authentication List page, click Security 

 Management Security, and then 

click the Authentication List link.

 

To change the authentication method for the defaultList: 

Select the check box next to the defaultList name

Use the drop down menu in the 1 column to select the authentication method that should 

appear first in the selected authentication login list. If you select a method that does not time 

out as the first method, such as ‘local’, no other method will be tried, even if you have 

specified more than one method. This parameter will not appear when you first create a new 

login list. User authentication occurs in the order the methods are selected. Possible 

methods are as follows:

Local: The user's locally stored ID and password will be used for authentication. 

Since the local method does not time out, if you select this option as the first method, 
no other method will be tried, even if you have specified more than one method.

RADIUS: The user's ID and password will be authenticated using the RADIUS server. 

If you select RADIUS or TACACS+ as the first method and an error occurs during the 
authentication, the switch uses Method 2 to authenticate the user.

TACACS+: The user's ID and password will be authenticated using the TACACS+ 

server. If you select RADIUS or TACACS+ as the first method and an error occurs 
during the authentication, the switch attempts user authentication Method 2.

None: The authentication method is unspecified. This option is only available for 

Method 2 and Method 3.