Netgear GS724TS-100NAS Manuale Utente

e.  Click the orange bar under the Destination Port Members heading to display the 

available ports. Select the port(s) to include in the outbound filter. Packets with the 

MAC address and VLAN ID you selected will be transmitted only out of ports that are 

in the list. Destination ports can be included only in the Multicast filter. 

To delete a configured MAC Filter, select it from the menu, and then click Delete.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.

If you make changes to the page, click Apply to apply the changes to the system.

MAC Filter Summary

Use the MAC Filter Summary page to view the MAC filters that are configured on the system. 

To display the MAC Filter Summary page, click Security 

 Traffic Control, and then click the 

 MAC Filter Summary link.

 

The following table describes the information displayed on the page: 

Click Refresh to update the page with the most current information. 

MAC Address

Identifies the MAC address that is filtered.

VLAN ID

The VLAN ID used with the MAC address to fully identify packets you want filtered. 
You can only change this field when you have selected the Create Filter option.

Source Port Members Displays the ports included in the inbound filter.

Destination Port 
Members

Displays the ports included in the outbound filter.