Netgear GS724TS-100NAS Manuale Utente

If you make changes to the page, click Apply to apply the changes to the system. 

Security MAC Address

Use the Security MAC Address page to convert a dynamically learned MAC address to a 
statically locked address. 

To display the Security MAC Address page, click Security 

 Traffic Control, and then click 

 Security MAC Address link.

 

To convert learned MAC addresses: 

Select the Convert Dynamic Address to Static check box.

Click Apply. The Dynamic MAC Address entries are converted to Static MAC address 

entries in a numerically ascending order until the Static limit is reached.

The Dynamic MAC Address Table shows the MAC addresses and their associated VLANs 
learned on the selected port. Use the Port List menu to select the interface for which you 
want to display data.

Click Refresh to refresh the page with the most current data from the switch.

Protected Ports Membership

If a port is configured as protected, it does not forward traffic to any other protected port on 
the switch, but it will forward traffic to unprotected ports. Use the Protected Ports Membership 
page to configure the ports as protected or unprotected.

VLAN ID

Displays the VLAN ID corresponding to the Last Violation MAC address.

MAC Address

Displays the MAC addresses learned on a specific port.