Netgear GS724TS-100NAS Manuale Utente
220
|
Chapter 6: Monitoring the System
GS716Tv2 and GS724Tv3 Software Administration Manual
Click Clear Counters to clear all the counters. This resets all statistics for the trap logs to the
default values.
default values.
Event Logs
Use the Event Log page to display the event log, which is used to hold error messages for
catastrophic events. After the event is logged and the updated log is saved in flash memory,
the switch will be reset. The log can hold at least 2,000 entries and is erased when an
attempt is made to add an entry after it is full. The event log is preserved across system
resets.
catastrophic events. After the event is logged and the updated log is saved in flash memory,
the switch will be reset. The log can hold at least 2,000 entries and is erased when an
attempt is made to add an entry after it is full. The event log is preserved across system
resets.
To access the Event Log page, click the Monitoring
Logs tab, and then click the Event
Logs link.
The following table describes the Event Log information displayed on the screen.
Field
Description
Log
The sequence number of this trap.
System Up Time
The time at which this trap occurred, expressed in days, hours, minutes, and
seconds since the last reboot of the switch.
seconds since the last reboot of the switch.
Trap
Information identifying the trap.
Field
Description
Entry
The number of the entry within the event log. The most recent entry is first.
Type
Specifies the type of entry.
Filename
The GS716T or GS724T source code filename identifying the code that
detected the event.
detected the event.
Line
The line number within the source file of the code that detected the event.
Task ID
The OS-assigned ID of the task reporting the event.