Netgear GS724TS-100NAS Manuale Utente

If you make any configuration changes, click Apply to send the updated configuration to the 

switch. Configuration changes occur immediately.

The following table describes the STP Status information displayed on the screen.

 

Click Refresh to update the information on the screen with the most current data.

CST Configuration

Use the Spanning Tree CST Configuration page to configure Common Spanning Tree (CST) 
and Internal Spanning Tree on the switch. 

To display the Spanning Tree CST Configuration page, click Switching > STP > Advanced 

 

CST Configuration.

Bridge Identifier

The bridge identifier for the CST. It is made up using the bridge priority and 
the base MAC address of the bridge.

Time Since Topology Change The time in seconds since the topology of the CST last changed.

Topology Change Count

The number of times the topology has changed for the CST.

Topology Change

The value of the topology change parameter for the switch indicating if a 
topology change is in progress on any port assigned to the CST. The value is 
either True or False.

Designated Root

The bridge identifier of the root bridge. It is made up from the bridge priority 
and the base MAC address of the bridge.

Root Path Cost

Path cost to the Designated Root for the CST.

Root Port

Port to access the Designated Root for the CST.

Max Age (secs)

Specifies the bridge maximum age for CST. The value must be less than or 
equal to (2 X Bridge Forward Delay) – 1 and greater than or equal to 2 X 
(Bridge Hello Time +1).

Forward Delay (secs)

Derived value of the Root Port Bridge Forward Delay parameter.

Hold TIme (secs)

Minimum time between transmission of Configuration BPDUs.

CST Regional Root

Priority and base MAC address of the CST Regional Root.

CST Path Cost

Path Cost to the CST tree Regional Root.