Netgear M4100-50-POE Manuale Utente

Use this command to get notifications when the CPU free memory falls below the configured 
threshold. A notification is generated when the free memory falls below the threshold. 

Another notification is generated once the available free memory rises to 10 percent above 

the specified threshold. To prevent generation of excessive notifications when the CPU free 
memory fluctuates around the configured threshold, only one Rising or Falling memory 
notification is generated over a period of 60 seconds. The threshold is specified in kilobytes. 
The CPU free memory threshold configuration is saved across a switch reboot.

memory free low-watermark processor <

1-1034956>

Logging Commands

This section describes the commands you use to configure system logging, and to view logs 
and the logging settings.

This command enables logging to an in-memory log that keeps up to 128 logs. 

logging buffered

This command disables logging to in-memory log.

no logging buffered

Global Config

When CPU free memory falls below this threshold, a notification message is triggered. 
The range is 1 to the maximum available memory on the switch. The default is 0 
(disabled).

disabled; critical when enabled

Global Config

Global Config