Netgear M4100-50-POE Manuale Utente
Utility Commands
583
ProSafe M4100 and M7100 Managed Switches
displayed during the capturing session. When capturing is in progress, unsaved,
not-yet-displayed packets will not be lost.
not-yet-displayed packets will not be lost.
Default
Format
capture line wrap
Mode
no capture line wrap
Use this command to disable the capture line wrap mode.
Format
no capture line wrap
Mode
show capture packets
Use this command to display packets captured and saved to RAM. It is possible to capture
and save into RAM, packets that are received or transmitted through the CPU. A maximum
128 packets can be saved into RAM per capturing session. A maximum 128 bytes per packet
can be saved into the RAM. If a packet holds more than 128 bytes, only the first 128 bytes
are saved; data more than 128 bytes is skipped and cannot be displayed in the CLI.
and save into RAM, packets that are received or transmitted through the CPU. A maximum
128 packets can be saved into RAM per capturing session. A maximum 128 bytes per packet
can be saved into the RAM. If a packet holds more than 128 bytes, only the first 128 bytes
are saved; data more than 128 bytes is skipped and cannot be displayed in the CLI.
Capturing packets is stopped automatically when 128 packets are captured and have not yet
been displayed during a capture session. Captured packets are not retained after a reload
cycle.
been displayed during a capture session. Captured packets are not retained after a reload
cycle.
Format
show capture packets
Mode
Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions
affecting their managed switch product.
affecting their managed switch product.
CAUTION:
The output of the debug commands can be long and might adversely
affect system performance.
affect system performance.
debug arp
Use this command to enable ARP debug protocol messages.
Disabled
Global Config
Global Config
Privileged EXEC
Default
disabled