Netgear M4100-50-POE Manuale Utente

O/S Support

USL: failed to sync L3 Route table on unit=
x

Could not synchronize unit x due to a 
transport failure or API issue on remote 
unit.  A synchronization retry will be issued

USL: failed to sync initiator table on unit=x

Could not synchronize unit x due to a 
transport failure or API issue on remote 
unit.  A synchronization retry will be issued

USL: failed to sync terminator table on 
unit=x

Could not synchronize unit x due to a 
transport failure or API issue on remote 
unit.  A synchronization retry will be issued

USL: failed to sync ip-multicast table on 
unit=x

Could not synchronize unit x due to a 
transport failure or API issue on remote 
unit.  A synchronization retry will be issued

ftruncate failed – File resides on a 
read-only file system.

ftruncate is called to correctly set the file’s 
size in the file system after a write. The file 
system is R/W so this msg indicates that 
the file system may be corrupted.

ftruncate failed – File is open for reading 
only.

ftruncate is called to correctly set the file’s 
size in the file system after a write. The file 
is opened for R/W so this msg indicates 
that the file system may be corrupted.

ftruncate failed – File descriptor refers to a 
file on which this operation is impossible.

ftruncate is called to correctly set the file’s 
size in the file system after a write. This 
msg indicates that the file system may be 
corrupted.

ftruncate failed – Returned an unknown 
code in errno.

ftruncate is called to correctly set the file’s 
size in the file system after a write. This 
msg indicates that the file system may be 
corrupted.

ping: bad host!

The address requested to ping cannot be 
converted to an Internet address.

osapiTaskDelete: Failed for (XX) error YYY The requested task cannot be deleted 

because: the requested deletion is called 
from an ISR, the task is already deleted, or 
the task ID is invalid.