Fujitsu eLux NG S26361-F2600-L134 Manuale Utente

 

 

 

 

 

 

Build # 27

  

139

 

•  Disable mouse motion events Information on mouse position will not be sent to the 

server continuously, but rather only upon mouse clicks. This improves performance for 
low-bandwidth connections. Default is deactivated. 

 
The Local resources tab offers additional settings for terminal servers that support RDP 5.2 
or higher. Note: This tab is only visible if you have the native RDP client version 1.3.1 or 
higher installed (“rdesktop52”). In addition, these options will have no effect if you set the 
protocol to “RDP V4” in the Advanced tab. To be able to use these settings, you must be 
using a terminal server that supports RDP 5.2 or higher. 

Figure 84: RDP client session settings: local resources 

•  Drives Allows you to map local drives. To map a drive, click to select the drive. Enter the 

mount point, which is the path to access the drive locally (see “3.9.5 Mount points”). Enter 
a letter. This is the drive that will appear in the RDP session. You can map up to 10 local 
drives. 
To access the drive from the command shell, use \\tsclient\<drive letter>, for 
example, dir \\tsclient\b would allow you to access the CD-ROM. 

•  Printers Allows you to automatically create up to four printer definitions for this session. 

The printers must be defined in the eLux NG starter > Printer tab and have a valid driver 
name as it appears on the server (capitalization is important). The first four profiles with 
drivers are used. To set a default printer, click to select the “default” check box in the eLux 
NG printer profile. 

•  Sound “Play local” means the sound will be played locally on the Thin Client. “Play 

remote” means the sound will be played remotely on the server. 

•  Ports Enabling the check box means the ports will be accessible from within the RDP 

session.