Fujitsu eLux NG S26361-F2600-L134 Manuale Utente
Codici prodotto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
160
4.7.4 X11 for X Applications Using the Local X Server
The X11 server developed by The XFree86 Project, Inc (
) and its
contributors is included in the base OS. No additional software must be installed.
Figure 100: Application definition dialog box for an X11 emulation
To configure an X11
From the Configuration tab, click New.
1. The
Application Definition
dialog box appears. Click the Emulation tab.
2. Click
X11
in the Emulation type list. A series of fields appears.
• Name: Enter an appropriate name for this application, such as “X11.”
• Server address: Enter the IP address (or name) of the UNIX server.
• User name: Enter the username on the UNIX server.
• Application: Enter the X application name with its complete path.
• Use SSH: If selected, the X11 session is started via the Secure Shell (SSH)
• Server address: Enter the IP address (or name) of the UNIX server.
• User name: Enter the username on the UNIX server.
• Application: Enter the X application name with its complete path.
• Use SSH: If selected, the X11 session is started via the Secure Shell (SSH)
protocol. Only the public key authorization is permitted (see page 170 for
instructions on how to set a public key).
instructions on how to set a public key).
3. Application restart: Click to select to immediately reconnect after the user logs off.
When this feature is selected, the application automatically starts when the Thin Client
starts or restarts.
starts or restarts.
4. Start automatically: Click this check box to open the session when the terminal
starts.
5. Desktop icon Creates a desktop shortcut for this application on the eLux NG desktop.
6. Click
6. Click
Finish
.