Fujitsu eLux NG S26361-F2600-L134 Manuale Utente
Codici prodotto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
184
5.3 Factory
Reset
Factory reset returns the Thin Client to the factory-delivered configuration state. User settings (Setup
tab) and defined applications (Configuration tab) are deleted. Firmware is not deleted.
tab) and defined applications (Configuration tab) are deleted. Firmware is not deleted.
Procedure for Factory Reset via Keyboard
1. Switch off the Thin Client.
2. Restart the Thin Client.
3. During the boot procedure press the TAB key within three seconds.
4. At the prompt “Please enter admin password” enter the terminal password (“elux” by
2. Restart the Thin Client.
3. During the boot procedure press the TAB key within three seconds.
4. At the prompt “Please enter admin password” enter the terminal password (“elux” by
default).
• If an invalid password is entered three times, the terminal restarts.
5. At the prompt “factory reset (y/n)?” type y. Previous settings information and defined
applications are deleted.
Alternatively you can initiate factory reset using the mouse.
Procedure for Factory Reset via Mouse
1. From
the
Setup
tab, click the Firmware subtab.
2. Click
Default
.
3. Click
Yes
in the eLux NG Starter dialog box. eLux NG restarts.
Figure 110: The Reset button in Setup > Firmware
Warning
A Factory Reset deletes all defined applications and resets configuration settings to factory
default.