Fujitsu eLux NG S26361-F2600-L134 Manuale Utente
Codici prodotto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
50
The following figure shows an example of the eLux NG starter with restricted access.
Figure 31: eLux NG screen with security settings - Configuration and Setup tabs disabled
3.7.3 Authorization
Hotkey
The default user “LocalLogin" is the local device administrator. The password for “LocalLogin”
is the Thin Client password.
is the Thin Client password.
You can access Setup or Configuration from an account in which they are disabled using the
so-called “terminal password authorization hotkey.”
so-called “terminal password authorization hotkey.”
To re-enable disabled settings
Figure 32: Device password hotkey dialog box
1. Select the eLux NG starter. Use the hotkey CTRL + ALT + HOME. The hotkey dialog
box appears.
2. Enter the terminal password (= password of “LocalLogin”) and click OK.
Note:
The terminal password is “elux” by default. If you change the terminal password
and forget it, to reset the password you must do a Recovery. See chapter “6 Recovery
Installation.”
Installation.”
3. All settings are re-enabled. Click the Settings tab to make changes to settings.
4. To disable this access, click Shut down > Log off from the Applications tab.
4. To disable this access, click Shut down > Log off from the Applications tab.
You can also re-enable settings using the remote management tool Scout Enterprise.
Configuration
disabled
Setup disabled