Fujitsu eLux NG S26361-F2600-L134 Manuale Utente
Codici prodotto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
67
3.11.5 Thin Client as Print Server
Other workstations or servers can use a printer connected to a Thin Client. These
workstations or servers must either support TCP direct print or have the have the LPR protocol
(BSD spool) installed.
The figure below shows the definition of an LPR printer in Windows NT Server.
workstations or servers must either support TCP direct print or have the have the LPR protocol
(BSD spool) installed.
The figure below shows the definition of an LPR printer in Windows NT Server.
Figure 42: Installing an LPR printer
To define an LPR printer in Windows NT
In Windows NT,
1. Install the “Microsoft TCP/IP Print Service” via Control Panel > Network > Services.
2. Install the printers in the Print Setup.
3. Use the eLux NG printer as a network printer from the Windows NT station.
2. Install the printers in the Print Setup.
3. Use the eLux NG printer as a network printer from the Windows NT station.
To define an LPR printer in Sinix
In Sinix,
1.
Create a so-called sinkfile for every printer. The name is arbitrary:
>/var/spool/Spool/config/my_elux_printer
>/var/spool/Spool/config/my_elux_printer
2.
Add the printer to the system. Be sure that the Thin Client can be reached when
entering the following command:
xpadd -dev my_elux_printer
entering the following command:
xpadd -dev my_elux_printer
da /var/spool/Spool/config/my_elux_printer
//
Sinkfile
-su root
// Xprint Supervisor
-fl bsd
// LPR print filter
-ca "host=myterminal queue=lp"
// Host name of Thin Client and queue
name as defined.
-pc HP_LASERJET
// Printer type