Fujitsu eLux NG S26361-F2600-L134 Manuale Utente
Codici prodotto
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
73
3.13.2 ISDN **
You have two possibilities to connect to ISDN: PCI interface card or USB modem.
3.13.2.1 ISDN Card
In this variant, the Thin Client has an ISDN card installed and is connected to an ISDN cable.
See “Appendix 6: Supported Hardware” for a list of supported hardware.
See “Appendix 6: Supported Hardware” for a list of supported hardware.
3.13.2.2 USB Network Adapter
In this variant, the Thin Client is connected to an ISDN cable over a USB network adapter.
Verify that a LAN cable (for example, Ethernet) is not connected to the device.
Verify that a LAN cable (for example, Ethernet) is not connected to the device.
Warning
Do not use USB ISDN with a Thin Client that already contains an ISDN card.
See “Appendix 6: Supported Hardware” for a list of supported hardware.
3.13.2.3 Configuring Network Hardware Settings for ISDN
Figure 45: Setup > Hardware > ISDN
1. From
the
Setup
tab, click the Hardware subtab.
2. Click
ISDN
from the Network type list.
A series of fields appears.
3. Select a profile from the Profile list. Otherwise click Edit to create or edit one. This opens
the Network profiles dialog box.
4. In
the
Network profiles
dialog box click New to create a new profile or Edit to modify an
existing one.
The Profile dialog box is displayed.