Omega OMB-DAQSCAN-2000 Series Manuale Utente

 

1-4      Daq Systems 

949595

 DaqScan/2000 

Series 

 

 

The DBK signal-conditioning cards and modules are designed for use with DaqLab, DaqScan, 

DaqBook, LogBook, and various data acquisition boards, i.e., ISA, PCI, and compact-PCI 

types.  The DBKs perform best when used with an acquisition device that can dynamically 

select channel, gain, and range.  DBK cards and modules with dynamic channel and 

gain/range selection allow for high channel-to-channel scan rates with a variety of 

transducers. 

Note:  Only passive DBKs, such as the DBK1 BNC module, the DBK11A screw terminal card, 

and the DBK40 BNC analog interface, can be used with Daq PC-Cards. 

DBK output signals can be bipolar, e.g., -5 to +5 V, or unipolar, e.g., 0 to 10 V.  The user can 

select a range of relevant values to correspond to the lowest signal (e.g., -5 or 0 V) and the 

highest signal (e.g., 5 or 10 V) signal.  This type of range selection guarantees the highest 

resolution in 12-bit or 16-bit conversion. 

DBK modules share the same footprint as the DaqBook and a typical notebook PCs; allowing 

for convenient stacking.  The majority of these modules have their own power supply; 

however, several options exist for packaging and powering the DBKs.   

 

Reference Note: 

DBK options are detailed in the DBK Option Cards and Modules User’s Manual 

(p/n 457-0905). As a part of product support, this manual is automatically loaded 

onto your hard drive during software installation.  The default location is the 
Programs directory, which can be accessed through the Windows Desktop

.