Omega OMB-DAQSCAN-2000 Series Manuale Utente

 

DaqScan Front Panel 

The DaqScan/2000 Series front panels contain a power indicator LED.  The power switch and 

connectors are on the rear panel.  

The DaqScan/2000 Series rear panels each contain a Power Switch, AC power cord connector, 

2 Synchronization jacks, a MAC Address Label, Ethernet connector, 5 LEDs [ 2 of which are on 

the Ethernet connector], and a set of DB37 connectors.  All four DaqScan models have P2 and 

P3 connectors; but in addition, DaqScan/2001 and DaqScan/2005 have P1 connectors for 

analog I/O. 

P1 - DB37 Connector:  P1 applies to DaqScan/2001 and DaqScan/2005 only.  P1 is the 

analog input port for 16 single-ended analog inputs or 8 differential, programmable on a per-

channel basis as single-ended or differential and as uni-polar or bipolar.  The 3 programmable 

ranges are from ±10 V to ±156 mV full scale.  P1 can be used to connect the DaqScan to an 

optional analog DBK card. 

P2 - DB37 Connector: P2 is a general purpose digital I/O port with 24 (3 x 8-bit) lines on P2, 

or digital I/O expansion port controlling up to 272 external lines.  Programmable as input or 

output.  P2 can be used to connect to an optional digital DBK card. 
P3 - DB37 Connector: 16-bit digital I/O port with 4 counter inputs and 2 timer outputs.  In 

addition, DaqScan/2001 and DaqScan/2004 each have a P3 connection to 4 analog outputs 

(DAC0, DA1, DAC2, and DAC3). 

 
 

DaqScan/2000 Series 

                  

 898095  

       

Connectors, Indicators, Cables, & Pinouts    4-1