Omega OMB-DAQSCAN-2000 Series Manuale Utente

Configuring the System for Operation 6

Step 1 - Install the Software ….. 6-2
Step 2 - Determine the type of Network Connection …… 6-2
Step 3 - Connect System Components …… 6-4
Step 4 - Power-up the System …… 6-5
Step 5 - Configure the Computer’s Network Settings …… 6-6
Step 6 - Configure Device Network Settings using DaqIPConfig …… 6-9
Step 7 - Configure and Test the System using the Daq Configuration …… 6-10

Connecting a DaqLab/2000 Series or DaqScan/2000 Series Device to the Ethernet

The DaqLab/2000 Series and DaqScan/2000 Series acquisition devices connect directly to an

Ethernet port on a PC or network hub via a built-in 10/100BaseT Ethernet interface. An

Ethernet patch cable CA-242 (1.5 foot) or CA-242-7 (7 foot) cable is used to make the

connection.

CAUTION

Turn off power to the system devices and externally connected equipment before

connecting cables. Electric shock or damage to equipment can result even under low-

voltage conditions.

Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.)

Reference Note: Adobe PDF versions of user

manuals will automatically install onto your hard drive

as a part of product support. The default location is in

the Programs group, which can be accessed from the

Windows Desktop. You can also access documents

directly from the data acquisition CD via the <View

PDFs> button located on the CD’s opening screen.

Minimum System Requirements

PC system with Pentium

Processor

Windows Operating System
RAM, as follows:

32 Mbytes of RAM for Windows NT

64 Mbytes of RAM for Windows 2000
64 Mbytes of RAM for Windows XP

DaqLab/2000 Series & DaqScan/2000 Series

898195

Configuring the System for Operation 6-1