Omega OMB-DAQSCAN-2000 Series Manuale Utente

Notes:  

¾  Using a DaqLab/2000 Series or DaqScan/2000 Series device on a typical LAN may 

affect the speed of the network and internet data transfer.  Because of this we 

recommend adding a network card to the computer and using one of the two 

dedicated network configurations. 

¾  Contact your network administrator before connecting your device to a corporate 

network. 

LAN with no DHCP Server  

(Local Area Network with no Dynamic Host Configuration Protocol server)

 

This scenario looks the same as that shown in the previous illustration, except there is no 

Dynamic Host Configuration Protocol (DHCP).  In this type of setup, one or more computers 

are connected to a network; and each computer has a static IP address. 

 

 

 

For information regarding connections, refer to Chapter 4, Connectors, Indicators, Cables, 

& Pinouts. 

 

device to the Ethernet: 

 

•   An available connection to the Ethernet.  The connection can be either 

-  an Ethernet jack on a computer or 

-  an Ethernet jack on a hub that is connected to the Ethernet. 

•    An Ethernet patch cable, e.g., a CA-242 (1.5 foot cable) or a 

CA-242-7 (7-foot cable).        

 

 

1.  Connect the Ethernet cable to the Ethernet jack on the Daq device. 

2.  Connect the other end of the Ethernet cable to the Ethernet jack on the host  

computer or network hub. 

6-4       Configuring the System for Operation                            

898195  

DaqLab/2000 Series & DaqScan/2000 Series