Omega OMB-DAQSCAN-2000 Series Manuale Utente

 

8-6   Taking Measurements     

898095

 DaqScan/2000 

Series 

Up to four DaqScan/2000 Series devices can be synchronized to each other via their rear 

panel SYNC connectors and associated cables.  Each device has two identical SYNC ports; 

either [or both] can be used to connect units.  The DaqScan units can be scan-synchronized 

and triggered from any other SYNC-connected unit.  Note that cables CA-74-1 and CA-74-5 

are 1-foot and 5-foot in length, respectively.  The total combined cable length of the Sync 

cables is not to exceed 15 feet (4.57 m). 

 

The preceding diagram shows how a DaqScan/2000 Series device can input or output 

synchronization timing and trigger events on either SYNC connector.  A more detailed block 

diagram follows shortly. 

 

Reference Notes: 

¾  The SYNC features are programmable via software. For detailed information 

see the Using Multiple Devices and the daqAdcSetClockSource sections of the 

Programmer’s Manual (p/n 1008-0901).  

¾  During software installation, Adobe

®

 PDF versions of user manuals 

automatically install onto your hard drive as a part of product support.  The 

default location is in the Programs group, which can be accessed from the 

Windows Desktop.  Refer to the PDF documentation for details regarding both 

hardware and software. 

 

Note: DaqScan/2002 and DaqScan/2004 have no P1 connector; thus the pin 20  

and pin 25 lines do not apply to those two devices.