3com 3.01.01 Manuale Utente

C

HAPTER

 11: S

YSTEM

 M

ANAGEMENT

00-e0-fc-17-a7-d6  1         LearnedEthernet1/1/2  300

00-e0-fc-5e-b1-fb  1         Learned Ethernet1/1/2  300

00-e0-fc-55-f1-16  1         Learned Ethernet1/1/2  300

With device management, the Switch 8800 displays the current state and event 
debugging information about the slots and physical devices. In addition, there is a 
command for rebooting the system when a function failure occurs.

Configuring the Managing Devices is described in the following sections:

■

■

■

Perform the following configuration in user view. 

In the case that there are several operational images in the flash memory, you can 
use this command to designate the file (*.app) to use when the Switch 8800 is 
booted.

Perform the following configuration in user view. 

Tasks for designating the file for the next boot are described in the following 
sections:

■

■

■

You can use this command to upgrade the BootROM with the BootROM program 
in the flash memory. This configuration task facilitates the remote upgrade. You 
can upload the BootROM program file, from a remote end to the switch, by FTP 
and then use this command to upgrade the BootROM on the modules.

Perform the following configuration in user view. 

Table 21   Rebooting the Switch 8800

Reboot the Switch 8800

Table 22   Designating the APP for the next boot

Designate the APP for the next boot

boot boot-loader file-url

Table 23   Upgrading BootROM

Upgrade BootROM

boot BootROM file-url