3com 3.01.01 Manuale Utente

Figure 5   SNMP Configuration Example

1 Enter the system view.

<SW8800>system-view

2 Set the community name, group name, and user.

[SW8800]snmp-agent sys-info version all

[SW8800]snmp-agent community write public

[SW8800]snmp-agent mib include internet 1.3.6.1

[SW8800]snmp-agent group v3 managev3group write internet

[SW8800]snmp-agent usm v3 managev3user managev3group

3 Set the administrator ID, contact and the physical location of the Ethernet switch. 

[SW8800]snmp-agent sys-info contact Mr.Smith-Tel:3306

[SW8800]snmp-agent sys-info location telephone-closet, 3rd-floor

4 Set the VLAN interface 2 as the interface used by network management. Add 

Ethernet port 2/1/3 to the VLAN 2. This port will be used for network 
management. Set the IP address of VLAN interface 2 as 129.102.0.1.

[SW8800]vlan 2

[SW8800-vlan2]port ethernet 2/1/3

[SW8800-vlan2]interface vlan 2

[SW8800-Vlan-interface2]ip address 129.102.0.1 255.255.255.0

5 Set the administrator ID, contact and the physical location of the Ethernet switch. 

[SW8800]snmp-agent sys-info contact Mr.Smith-Tel:3306

[SW8800]snmp-agent sys-info location telephone-closet,3rd-floor

6 Enable the SNMP agent to send the trap to Network Management Station whose 

IP address is 129.102.149.23. The SNMP community is public.

[SW8800]snmp-agent trap enable standard authentication

[SW8800]snmp-agent trap enable standard coldstart

[SW8800]snmp-agent trap enable standard linkup

[SW8800]snmp-agent trap enable standard linkdown

[SW8800]snmp-agent target-host trap address udp-domain 

 

Remote Network Monitoring (RMON) is an IETF-defined MIB. It is the most 
important enhancement to the MIB II standard. It is used for monitoring the data 
traffic on a segment and even on a whole network. It is one of the most widely 
used network management standards. 

RMON is based on the SNMP architecture and is compatible with the existing 
SNMP framework, so it is not necessary to adjust the protocol. RMON includes 

NMS

129.102.149.23

129.102.0.1

Ethernet