Enterasys Networks 6000 Manuale Utente

Managing the Module

2-87

The Device View

VLAN port assignment and egress state configuration is performed using the VLAN Port 
Configuration (Basic) window, which is accessed from the Bridge Extension window. You 
can also use this window to access Advanced VLAN Port parameters using the Advanced 
button at the bottom of the window. To launch the window:

1.

In the Device View, select Bridge Extension Configuration... from the Device 
menu.

2.

In the Bridge Extension Configuration window, click on the VLAN button and 
select VLAN Port Configuration... from the menu. The VLAN Port 
Configuration (Basic) window, 

, appears:

Figure 2-30. The VLAN Port Configuration (Basic) Window

The window displays the following information:

Displays the number that identifies the port.