Enterasys Networks 6000 Manuale Utente

The Device View

2-104

Managing the Module

To edit the device date:

1.

Click on Device on the Device View menu bar to access the Device menu. 
Click on Edit Device Date.

2.

The Device Date change window, 

, will appear.

Figure 2-38. The Device Date Window

3.

Enter the new date in a mm/dd/yyyy format, either by highlighting the field you 
wish to change and using the up and down arrow buttons, or by simply 
entering the new value in the appropriate field.

4.

Click on the OK button to save your changes, or on the Cancel button to exit 
without changes.

When you disable bridging at a port interface, you disconnect that port’s network from the 
bridge entirely. The port does not forward any packets, nor does it participate in Spanning 
Tree operations. Nodes connected to the network can still communicate with each other, 
but they can’t communicate with the bridge or with other networks connected to the 
bridge. When you enable bridging for the interface, the port moves from the Disabled state 
through the Listening and Learning states to the Forwarding state; bridge port state color 
codes will change accordingly.

To enable or disable bridging for an individual interface: