Samsung MCC8 Manuale Utente

C

HAPTER 

3:

 

O

NE

-T

IER 

C

ONFIGURATION

 5 

Configuration 

The Configuration Menu is used to specify your MasterConsole II configuration and to set/change 
operation parameters. 

 

1.  Activate on-screen user interface by pressing the hot-key (<Scroll Lock> by default) twice 

rapidly. 

2. Press 

<F4> to access the Configuration Menu.  

 

a.  The Connected field displays the Channel ID and Name of the currently selected 

computer. 

b.  The Model field displays the model number of this MasterConsole unit. 

3. Use 

the 

<Tab> (forward)/<Shift> + <Tab> (backward) keys to highlight the desired field and 

make your changes as follows: 

a. 

To change Name (default is the unit’s model number): Move to Name and type a name 
up to five characters. This field is used for your identification purposes only. 

b. 

The Device field specifies the type of device connected to each channel. The default 
character is ".", which indicates that the device is a computer. In a one-tier configuration, 
only a computer may be connected to each channel. The Device field settings may be 
changed when expanding to a two-tier configuration.  

c. 

To turn AutoScan ON/OFF (default is OFF): Move to Scan and press the <

Ç>/<È> keys 

to toggle. If you exit On-Screen User Interface with AutoScan ON, MasterConsole II will 
scan according to the currently set mode (Individual/Global) and scan rate. 
ƒ  To change the Global Scan Rate (default is 3 seconds): Move to Set and type a number from 

01 to 99, or press the <Ç>/<È> keys to specify the Scan Rate (in seconds) for Global 
AutoScan. 

ƒ  To change AutoScan mode (default setting is Global): Move to Mode and press the 

<Ç>/<È> keys to toggle between Global and Individual. See page 34 for description. 

d. 

To turn AutoSkip ON/OFF (default is OFF): Move to Skip and press the <

Ç>/<È> keys to 

toggle. With AutoSkip ON, only active channels can be selected. 

e. 

To change the ID Display time interval (default is 3 seconds): Move to ID Display and 
type a number from 01 to 99, or press the <

Ç>/<È> keys to specify the interval (in 

seconds) you want the Channel ID and Name to display when each computer is selected. 
Type 99 if you want the Channel ID and Name to display continuously.  

f. 

To change the On-Screen User Interface activator (default is <Scroll Lock>): Move to 
Hot Key and press the <

Ç>/<È> keys to select the desired key. The hot-key can only be 

<Scroll Lock> <Num Lock>, <Caps Lock>, left <Shift> or left <Alt>.  

g. 

To change the menu Display position: Move to Menu and press the <Enter> key. Then 
press the <

Ç>, <È>, <Å>, and <Æ> keys to move the menu vertically and horizontally to 

the desired position. Then press <Esc> or <Enter>.