Extreme networks 17001 Manuale Utente
Maintenance Procedures for Summit X650 and Summit X480 Series Switches
Summit Family Switches Hardware Installation Guide
210
Replacing a Summit X480/X650 Fan Module
The procedure for replacing a fan module is the same for either a Summit X480 series switch or a
Summit X650 series switch.
Summit X650 series switch.
You need the following tools and equipment to replace a Summit X480/X650 series fan module:
●
ESD-preventive wrist strap
●
1/2-inch flat-blade screwdriver
CAUTION
Be sure to finish the replacement procedure promptly. The switch may overheat if it is left without cooling for an
extended period.
extended period.
To replace the fan module:
1
Completely loosen the captive retaining screws at the lower corners of the fan module (
).
2
Slide the fan module out of the switch and set it aside.
Figure 178: Removing a Fan Module (Summit X650 Series Switch Shown)
3
Carefully slide the replacement fan module into the switch (
Figure 179: Installing a Fan Module (Summit X650 Series Switch Shown)
4
Align and fully tighten the captive retaining screws.
SH_090
SH_091