Extreme networks 17001 Manuale Utente

Summit Family Switches Hardware Installation Guide

The Summit X350 series switches provide 24 or 48 Ethernet ports that deliver high-density fast Ethernet 
connectivity using fixed 10/100/1000BASE-T ports. Each Summit X350 series switch has four 
combination ports that provide 10/100/1000 BASE-T or SFP connectivity for 2 Gbps of copper or fiber 
connectivity. A serial console port on the front panel allows you to connect a terminal and perform local 
management. An Ethernet management port can be used to connect the system to a parallel 
management network for administration. Alternatively, you can use an Ethernet cable to connect this 
port directly to a laptop to view and locally manage the switch configurations.

The rear panel of the switch has an option slot to accommodate one of the following Summit option 
cards:

■

Summit XGM2-2xf option card, which allows you to add one or two 10-gigabit XFP modules

■

Summit XGM2-2xn option card, which allows you to add one or two 10-gigabit XFP modules

■

Summit XGM2-2bt option card, which allows you to add one or two fixed 10GBASE-T ports

■

Summit XGM2-2sf option card, which allows you to add one or two 10-gigabit SFP+ modules

For option card installation instructions, see 

Power connectors on the rear panel of the switch include an AC power input socket and a redundant 
power connector. The internal AC power supply operates from 100 VAC to 240 VAC. The switch 
automatically adjusts to the supply voltage. The redundant power connector allows you to connect the 
switch to the EPS-500 external power supply. When a compatible external power supply is used with 
the Summit X350 series switch, the internal and external power supplies are fully fault tolerant and 
load-sharing. If one power supply fails, the other power supply provides sufficient power to operate the 
switch. 

The Summit X350 series switches include the following switches:

●

●

Summit X350-24t-TAA Switch

●

●

Summit X350-48t-TAA Switch

.