Grizzly G8988 Dépliant

MODEL G8988

SAFETY PADDLE SWITCH

INSTRUCTIONS

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

WARNING: NO PORTION OF THIS INSTRUCTION SHEET MAY bE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIzzLY INDUSTRIAL, INC.

#ts13929 printed in ChinA

Figure 1. g8988 safety paddle switch.

Introduction

the Model g8988 features a large on/oFF pad-
dle with a removable safety key that can be used
to disable the switch. this switch is designed to fit
a

⁄

" x 1

⁄

" rectangular hole.

Specifications

rated Voltage ..................................... 125V/250V
rated Current at 125V ................................... 16A
rated Current at 250V ................................... 10A

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

• Installation must only be performed by an

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or rated

for these environments.

• Make sure there is a verified machine

ground on the circuit this switch is

installed.